COBHAM SOL4MTX Specifikace stáhnout pdf (Strana 30)

SOLO4 – ‘DropCam’ Transmitter

For further information please contact +44 (0)1489 566 750

Speciﬁcation:

Camera

Type ¼’’ CMOS Fixed Focal 3.4mm (56deg H-FOV), F2.0

Interchangeable Lenses 8mm and 16mm

Pixels 640x480

Resolution >460 TVL

Sensitivity 0.05Lux

Signal to noise >46dB

Microphone

Type Microphone Omni 50-13KHz

Sensitivity 60dB +/-3dB

Output

RF Output SMA

Antenna Type 2dBi Vertical Polarisation Omni Flexi antenna

Frequency Bands 2.00 to 2.5GHz,

1.0 to 1.5GHz (supplied antenna 1.2 to 1.5Ghz),

300 to 450MHz

Power 100mW

Power Control 30dB in 1dB steps

Tuning Steps 250KHz

Modulation

Bandwidth 8/7/6/2.5 MHz

FEC 1/2, 2/3, 3/4, 5/6 (bandwidth dependent)

Modulation QPSK, 16QAM and 64QAM (bandwidth dependent)

Video

Line Standard PAL (P variant), NTSC (N variant)

Resolution 704, 528, 480, 352

Coding Mode MPEG2

Delay Less than 50 - 250ms (mode dependent)

Audio Encoding

Sample Rate 32/48KHz

Format MPEG2 Audio 384Kb/s to 64Kb/s mono

Encryption

Format ABS 32-bit as standard, AES128/256 (optional)

Remote Control

RS232 Control from PC GUI Application

Data Input

RS232 1K2 to 115K6 User data input

External DC input

6 – 16V (internal battery charges with >12.5V only)

Trigger Input

Close contact input pins for ‘wake-up’ and ‘sleep’

Battery

Voltage 7.5V

Capacity 2200mA/h

Duration Typically 3 hours plus

Physical

Dimension L 110mm, H 55mm, W 37mm

Weight 340g

Power Consumption 4.8 to 5W depending on mode

Power

DC input (8A fused) 11-16V (Reverse Polarity Protected)

Battery backup (internal fuse) 3.5 hours operation in 1W mode (NiMH)

Environment

Temperature Range -10 to +60 deg C

Enclosure IP66

Control and DC Connector - 7pin Binder 712 Series PN. 99 0422 0007

Pin 1. Vin

Pin 2. Gnd

Pin 3. 232 Control Out of Unit

Pin 4. 232 Control Into Unit

Pin 5. 232 User Data In

Pin 6. Close Contact 1

Pin 7. Close Contact 2

Product Code:

SOL4DCAM-N-030045 Drop Camera NTSC 300-450MHz

SOL4DCAM-N-120150 Drop Camera NTSC 1.20-1.50GHz

SOL4DCAM-N-200250 Drop Camera NTSC 2.00-2.50GHz

SOL4DCAM-P-030045 Drop Camera PAL 300-450MHz

SOL4DCAM-P-120150 Drop Camera PAL 1.20-1.50GHz

SOL4DCAM-P-200250 Drop Camera PAL 2.00-2.50GHz

TORCP Torch Clip Bracket for Drop Camera

The SOLO4 DropCam Transmitter is an

integrated rapid deployment wireless video

surveillance solution, integrating camera,

microphone, user data, battery and digital

COFDM transmitter into a single rugged

housing. The DropCam is ideal for rapid

deployment surveillance scenarios such as

event or room monitoring or fire and safety

applications. The COFDM modulator ensures

excellent range even in mobile and non-line

of sight applications (typically 300-500m).

The DropCam is available in a range of

frequency bands from 300MHz to 6GHz and

is supplied with interchangeable lenses (3mm,

8mm and 16mm) to suit all applications.

The rugged but lightweight IP66 chassis

enables the unit to be used in prolonged

outdoor deployments, while tripod mount

and magnetic mount fittings enable the

SOLO4 DropCam Transmitter to be

positioned easily.

The Transmitter can be mounted on standard

baton-style torches such as the Maglite by

employing the optional DropCam Torch Clip

Mount, creating an ideal solution for first

responder and emergency services workers.

The re-chargeable integral battery can

power the unit for 3 hours of continuous

transmissions. For longer deployments the

DropCam is supplied with an external DC

input.

Privacy is ensured with built-in 32-bit ABS

encryption or, for greater security, AES128-

or 256-bit encryption can also be provided,

subject to export controls.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 60 61

Komentáře k této Příručce

Žádné komentáře

COBHAM SOL4MTX Specifikace Strana 30

Komentáře k této Příručce